Įmonės naujienos

Dar turite klausimų apie EV įkrovimą?

2021-04-01

Bet kokie klausimai JūsųEVCkrautis?

 

1. Gali įsijungiameoro kondicionierius metu the EV Ckraunasi?

When the weather is hot, if there is no rest place around the ckraunasi station, many car owners will ask: Can the electric car be turned on in the air-conditioning to rest metu the ckraunasi process?

Like refueling at a gas station, in principle, it is recommended to charge away from people, that is, when people leave the car metu ckraunasi; this can eliminate potential safety hazards from the source. Secondly, the act of turning on the air conditioner while ckraunasi will increase the internal charge load of the battery and affect the service life of the battery.

Therefore, when choosing an outdoor ckraunasi station, try to choose a ckraunasi station with restrooms and other supporting facilities for ckraunasi. When the car is ckraunasi, leave the car and go to the lounge to wait.

 

2. Ar baterija būti sugadintas naudojantFast EVCharger?

To be precise, frequent fast ckraunasi will cause certain damage to the battery compared to slow ckraunasi.

Because fast ckraunasi uses a current that is several times or even ten times higher than the standard ckraunasi current for ckraunasi. In the fast charge mode, when the power is charged to about 80%, the subsequent power will be fully charged in the slow charge mode.

If fast ckraunasi is used frequently, the polarization of the battery cells will be accelerated, causing the cells to deplete lithium. In the process of lithium analysis, lithium ions will be reduced, which will eventually lead to a decrease in battery capacity, which will affect battery life. Under normal circumstances, let the battery rest for a short time after fast ckraunasi, the lithium metal will return to lithium ion, and the critical temperature will return to the normal value. However, frequent fast ckraunasi will reduce the battery's ability to restore.

Therefore, in order to ensure that electric vehicles can better solve the cruising range, car owners can choose the “daily slow ckraunasi, emergency fast ckraunasi” approach, or slow ckraunasi once a week to supplement.

 

3. Ką turėčiau darytijeiEVfailed to būti apkaltintam?

The electric vehicle ckraunasi process is mainly divided into 6 steps: physical connection, low-voltage auxiliary power-on, ckraunasi handshake, ckraunasi parameter configuration, ckraunasi, and ckraunasi end.

When ckraunasi an electric vehicle, the first condition that must be met is the matching of the ckraunasi gun and the ckraunasi interface, that is, the physical connection. If the ckraunasi gun can be inserted into the car normally, the foundation of ckraunasi is established. Low-voltage auxiliary power-on is the process of powering on the vehicle's BMS. Only when the BMS is powered on can further handshake and communicate with the ckraunasi pile, that is, mutual confirmation of the version. If the version is the same, the BMS will send detailed vehicle information and exchange information with the ckraunasi pile. During the car ckraunasi process, the two will generate a large number of messages. If there is a mismatch, the normal ckraunasi work cannot be completed.

Normally, once the ckraunasi fails or the ckraunasi is interrupted, the ckraunasi pile will display the reason code for the ckraunasi failure. Once this happens, it is recommended to call the customer service of the ckraunasi station or look for the help of the station staff to determine whether it is the ckraunasi fault caused by the car or the ckraunasi pile.

 

 

„Connexions“ technologijapasiūlymaiNešiojamas namų naudojimasEVCharger geros kokybės.

Kviečiame susisiekti su mumis, jei norite gauti daugiau informacijos.